(920) 858-3252

Belly Bands are roll formed from mild steel to the OD of the drum for additional structural integrity.  With an 80′ debarking drum full of logs, the stresses are extreme and cracks will form.  These belly bands give significant added strength for longer life.


Debarking Drum Lifters are available in curved,


or angle versions:


Infeed chutes formed as required from TriBraze ®, Super-C ®, or a combination of the two as seen below.

Infeed Chute photo above:  Looking into the drum shows TriBraze ® on the top (smooth in lower left corner of photo) for impact, with Super-C ® on the bottom half for abrasive wear.


Here the infeed chutes formed from Super-C ® is plug welded into place.

It has lasted 3 times longer than AR400.

The Answer to your wear resistent steel challenges